Computer secretary desk – Most standard desks are decidedly outdated and become uncomfortable. Many have barely enough room for anything other than the home computer. Corner desks solve this problem by providing twice the surface space, while taking advantage of the room space, which are otherwise underutilized. Make your own basic computer corner desk for your computer and non-computer left with space requirements.
Cut measure a single rectangle of plywood 5 feet by 3 feet. Use the blocks and hand saw makes this piece was done in half an angled line. When you tilt one of these pieces of head and press the oblique edges of the pieces together, they form an angle of 90 degrees in the corner of a room fit.
Install the desktop pieces on the goats with wood glue and wood biscuits. Six to eight slots in each edge of the angled sides of the computer secretary desk pieces, spacing them so that they will cut evenly and identically up when put together. Line-up the lip portions to the edge of the piece Desk, serpent, so that they hang down you four strips with the reception edges of equal length and positioning of the Lips, the edge of the desk.
Attach the legs with wood glue. On the underside of the computer secretary desk, to position the inside of the lip. Place one leg on each side of the desk-corner, near the point. Place two legs at each end of the desk; place them at the ends of the long side of both outside and inside the legs of the “L” shape. Paint; apply, if desired, according to the manufacturer.