March 27, 2019 U Shaped Computer Desks

Do it yourself! U shaped computer desk

U shaped computer desk – First draw the design on paper for your desk. Measure the area that you’re putting the desk. Second transfer these measurements to medium density fiber sheets, or MDF. You need a piece for the entire length of the desk or the bottom of the “U”, and two pieces of the desk width minus the measurement of the desk. Third sand the cut edges to remove any splintered wood.

Turn the three pieces upside down on the work surface. The edges line up to make the shape of a “U shaped computer desk” with the longest piece on the bottom of the “U”. Fiveth place three flat brackets on both seams where the two sides meet. Sixth screw each bracket in position with a screw on each end, to connect the bracket to the underside of the desk. Seventh insert a flange threaded pipe outside the four corners of the bottom of the desktop. A flange of the tube has a flat side that will sit against the wood and a threaded side which is screwed on the metal tube legs.

Insert two flanges on the inner corners to the tips of the “U shaped computer desk.” spatial two flanges around the outer edge of the desktop on the “U bottom”, and another one on each side. This is eight flanges for eight legs. Eight secure each flange to the underside of the desk with four screws in each flange. Nineth screw pipes in each metal flange. Tenth attach the remaining eight flanges to the bottom of the metal poles. Eleventh turn the desk more and sand the top and on the sides. Last, wipe with a clean cloth and paint or stain as desired.

Comments are closed.