Nursery glider and ottoman – To introduce an articulated ottoman in the living room automatically increases the comfort of each piece of furniture in the room – and gives you an extra seat for a large group or party. Install hinges at the top of an ottoman allow the padded seat to lift off, exposing the ideal storage space for blankets. While it is easy to put hinges on an old nursery glider and ottoman, build an articulated ottoman from the ground will ensure a customized product that precisely meets your needs.
Stand the four sides of the nursery glider and ottoman in a square with each board are positioned so that one end is closed in the side of another board has a board closed in its side. Place the base on top of them and four drill holes down through the top of the base plate and into the center of each adjacent board, for a total of 16 holes.
Drilling holes with the same diameter as the caster post at each corner of the ottoman, about one inch from each side. Insert wheels into the holes properly and facing ottoman right side up. Place the lid on top of the assembled Ottoman boards. Lift the cover slightly and place the hinges evenly on the upper surface of one of the side boards. Mark the location of the screw holes in both the kicker and the lid. Attach the hinges to the side board and cover with 1-inch wood screws.
Continue stretching and stapling the fabric along the sides, working slowly and filling padding in the lid as you go. Leave a six inch opening on the last page and stuff lid until it is secure. Stretch the fabric tightly, stapling down and cut off the excess. Hopefully this article can be help you to decorate your beautiful room.chocolate glider and ottoman